Eleaf iStick Pico 75W Box

Eleaf

  • €41.00

Will be in stock after

Eleaf iStick Pico 75W Box

 

The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). With a compact size, you can hold it in the palm, much more convenient for usage and portability. Powered by single interchangeable 18650 cell, the iStick Pico also provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.
 
 


SPECIFICATIONS:
 

  • Size: 45mm*23mm*70.5mm
  • Thread type: 510 thread
  • Cell type: High-rate 18650 cell
  • Cell type: (Continuous discharge current should be above 25A)
  • Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
  • Output wattage: 1-75W
  • Resistance range: 0.05-1.5ohm (TC modes)
  • Resistance range: 0.1-3.5ohm (VW/Bypass mode)
  • Temperature range: 100-315℃/200-600℉ (TC modes)
 
 
THE KIT CONTAINS:
 
  • 1 x iStick Pico MOD (1x 18650 battery needed - NOT included)
  • 1 x USB Cable
 
 
Operation Guide:
 
Power on and off: Install a high-rate 18650 battery(discharge current above 25A); press fire button 5 times continuously to turn on/off the device.
Vaping: Long press the fire button and take a puff.
Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.
Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.
Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.
Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.
Charging: The 18650 cell can be charged in the iStick Pico through the side USB port via 1A wall adapter or computer or charged with an external battery charger. The recommended way is to charge the cell externally as it will take less time to give the cell a full charge.
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

 
 
 
CAUTION! The device comes without a battery, which must be purchased separately.
 
Recommended accessories:
 
        
  
 
Optional accessories:
CHARGERS
 

We Also Recommend